PUD/First Federal Weatherization Loan Program: Eligible Measures
Electric Energy Conservation Building Improvements:
- Ceiling Insulation
- Wall Cavity Insulation (loose-fill)
- Wall Cavity Insulation (batt)
- Floor Insulation
- Blower Door Testing (with weatherization)
- Air Sealing (building envelope)
- Heating Duct Testing
- Duct Sealing/Duct Insulation
- Air to Air Heat Exchanger for Indoor Air Quality
- Window Upgrades (U-value of .30 or lower)
- Water Pipe Insulation (with weatherization)
- Insulated Exterior Doors
Electric Heating and Cooling Improvements:
- Electric Programmable Set-Back Thermostats (for Electric Heating and Cooling Systems)
- Electronic Line or Low Voltage Thermostats
- Electric Ground Source Heat Pump (Must be installed by IGSHPA installer)
- Electric Air Source Heat Pump with an HSPF of 8.5 and SEER 14 or greater
Water Heating Improvements & Appliances
- High Efficiency Electric Tank-type Water Heaters.
- Minimum energy factor required:
- 50-79 gallons: energy factor of .93 or higher
- 80+ gallons: energy factor of .91 or higher
- Pipe Insulation with weatherization (min. R-3)
- Solar Water Heating (factory manufactured)
- Electric Water Heater Heat Pumps (factory manufactured)
- Electric Demand/Point of Delivery Water Heaters
Solar
- Photovoltaics (PV Panels)
- Inverters
- Solar Package/System Equipment
- Solar PV Roofing