LED Area Light Replacement Fixture Rebate Application

LED Exterior HID Area Light Fixture Requirements

This rebate is for high-intensity discharge (HID) exterior lights only.
Each new LED area light fixture must replace an existing high-pressure sodium (HPS), metal halide (MH), or mercury vapor (MV) light fixture.
The HID Wattages listed below are nominal lamp Wattages and don’t include ballast Wattage.
(A) For 400 Watt or higher HID light fixtures the new LED fixtures must be 270 Watts or less. These qualify for $120 per light fixture.
(B) For 200 Watt or higher HID light fixtures the new LED fixtures must be 135 Watts or less. These qualify for $80 per light fixture.
(C) For 100 Watt or higher HID light fixtures the new LED fixtures must be 65 Watts or less. These qualify for $50 per light fixture.
(D) For 50 Watt or higher HID light fixtures the new LED fixtures must be 30 Watts or less. These qualify for $30 per light fixture.
(E) For 35 Watt or higher HID light fixtures the new LED fixtures must be 20 Watts or less. These qualify for $30 per light fixture.
New LED fixtures must be currently installed and in use at the Clallam County PUD electrical service address listed on the front of the form.
Full copies of itemized receipts showing payment must be attached.
The rebate amount is capped at 70% of product cost.
Access to installed new light fixtures must be provided upon request by a PUD &/or Bonneville Power Administration Rep for the purposes of verifying the installation.
This rebate offering can be discontinued at any time.

It is highly recommended, although not required, that the new LED light fixtures is listed either on the ENERGY STAR® qualified products list or the Design Lights Consortium’s qualified products list.